BS ISO BRITISH STANDARD 10459:1992 Implementation of IS0 10459:1992 Textile machinery - Dyeing and finishing machines - Designation of operating ranges of component parts UDC 677.057:621.81:003.62 NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW BS IS0 10459:1992 Committees responsible forthis British Standard The preparation of this British Standard was entrusted by the Textiles and Clothing Standards Policy Committee (TCM/-) to Technical Committee TCM/33, upon which the following bodies were represented: British Association of Clothing Machinery Manufacturers British Narrow Fabrics Association British Paper and Board Industry Federation British Textile Machinery Association British Textile Technology Group Clothing and Footwear Institute Confederation of British Wool Textiles Limited Consumer Policy Committee of BSI Health and Safety Executive Knitting Industries' Federation Ltd. Textile Finishers' Association Textile Institute Textile Research Council (HATRA) University of Manchester (Institute of Science and Technology) This British Standard, having been prepared under the direction of the Textiles and Clothing Standards Policy Committee, was published under the authority of the Standards Board and comes into effecton Amendments issued since publication 15April 1993 Amd. No. Date Comments C BSI 02-2000 The following BSI references relate to the work on this standard: Committee reference TCM/33 Draft for comment 91/43033 DC ISBN0580220931 BS ISO 10459:1992 Contents Page Committees responsible Inside front cover National foreword i Foreword ii Text of ISO 10459 1- BSI02-2000 :1